1.The whole software has complete functions,high-speed,high-precision processing, and network functions.

2.Modular structure is widely used in the design of the system.The structure is easy to disassemble and assemble,and the control boards are highly integrated,which greatly improves the reliability,and is convenient for maintenance and replacement.

3.There are better protection measures.FANUC adopts better protection circuit for its own system.

1.Roundness tolerance of two supporting Journal AB is 0.005mm, radial runout tolerance is 0.005mm, and surface roughness is 0.005mm.surface roughness Ra is 0.4mm, and the dimension accuracy of the supporting journal is IT5.

2.Strong dynamic and static stiffness, the maximum speed can reach 5000 revolutions.

3.The spindle is made of materials independently developed by Jiangnan for many years. Its surface hardness and fatigue strength are high. Moreover, the nitriding layer has the advantages of corrosion resistance and small heat treatment deformation.

• It can store 12 cutting tools, complete various processing requirements, greatly shorten processing time and reduce production costs.

• When changing the tool, it can stop at the position of changing tool accurately and repeat positioning accuracy is +1.

• The speed of tool change is only 0.52 seconds.

• Hydraulic chuck adopts fully enclosed structure, all mating surfaces have dust-proof function, high clamping accuracy and long service life.

• The clamping force is large and the clamping range is wide. Hydraulic chuck improves the disadvantage of traditional hydraulic chuck, such as small clamping force and unstable force. And the clamping force is stable and reliable.

• Using high rigidity roller as rolling element

and making the full length of the roller more than 1.5 times

the diameter of the roller, the higher rigidity can be obtained.

• Four directions equal load. In order to make the four

directions of action (radial, anti-radial and lateral) of the LM

slider have the same rated load, the rollers are designed to

be arranged at 45 degrees of contact angle, and all directions have high rigidity.

• The use of roller retainer can eliminate the friction

between the rollers, and improve the oil retention  capacity,so

as to achieve long-term operation without maintenance.

• Schneider's materials, whether PC materials or internal wiring posts, are the best.

• High stability. It can adapt to the fluctuation of AC system voltage and has a

certain ability to suppress the noise interference of power supply network.

• High security. The system has reliable and effective interlocking, good

insulation of electrical equipment, complete protection and solid grounding.

• The integral inner protective cover has simple design and long service life.

The spattered iron chips and chips liquid directly follow the slope of the protective

cover of 30 degrees and fall on the chips removal machine below.

• The chip removal machine separates the chip liquid from the chip,

discharges the chip from the machine, ensures that the iron chip in the machine

will not accumulate, and improves the work efficiency.

• Hydraulic tailstock can control the top of tailstock systematically, cooperate with

hydraulic chuck to realize automatic loading and unloading, and improve clamping efficiency.

• The special hydraulic station for machine tools provides more

stable clamping force. It has the advantages of high energy transfer, good control

performance, high speed, unsuitable for oil leakage and low maintenance workload.

。